Any network professional need a boost in their skills when it comes to network routing, switching, general troubleshooting, IP addressing, and many other fields. The comprehensive knowledge in the above sectors will not only secure you a job with excellent pay but also widen your skills and capability to deal with any network designs, architectures, and complicated issues.
If you want to move from Linux Junior to Senior Linux Systems Administrator, then check: Best Linux Books for Beginners
The following books are among the latest released and best-rated that will aid you in your Cisco CCNA R&S (200-125) certification preparation.
1. CCNA 200-301 Official Cert Guide Library
This book is authored by Wendell Odom and it is the only self-study resource approved by Cisco. It provides a thorough evaluation of the most current CCNA exam topics and questions. The book has been updated to refresh the content for the latest CCNA exam topics and is the only self-study resource approved by Cisco. This guide contains two books CCNA 200-301 Official Cert Guide, Volume 1 and CCNA 200-301 Official Cert Guide, Volume 2 to provide complete reviews and a more challenging and practical preparation experience.
The covered CCNA questions will include CCENT/CCNA ICND1 Official Cert Guide and CCNA ICND2 Official Cert Guide. The book has got an excellent rating and is readily available from the link below.
2. CNA 200-301 Portable Command Guide
All the CCNA-level Routing and Switching commands you need to pass your CCNA exams are in this book. It is also a portable and valuable resource for Network Engineers working in small server rooms, data centres, remotely etc.
This book has detailed coverage of:
- Network Fundamentals: Subnetting, VLSM, route summarization, cables/connections, CLI
- LAN Switching: Switch configuration, VLANs, VLAN trunking protocol, inter-VLAN communication, STP, EtherChannel
- Routing (IPv4/IPv6): Router configuration, static routing, RIPng, EIGRP/EIGRPv6, OSPFv2/OSPFv3
- WAN: Point-to-point protocols, eBGP, GRE tunnels, QoS
- Infrastructure Services: DHCP, FHRP, HSRP, NAT
- Infrastructure Security: Switch port security, ACL traffic management, device hardening
- Infrastructure Management: Backup/restore, password recovery, CDP, LLDP, IOS tools, device monitoring, IOS licensing, troubleshooting
You can buy this book for a self-paced study routine for your Cisco CCNA R&S certification exam.
3. CCNA ICND2 Study Guide
This is among the best CCNA books by Todd Lammle a leading networking authority. It explores topics in CCNA and ICND2 exams and gives a detailed description of the content. This content covers 100% of the exam 200-105 objectives. Here, the author provides a detailed explanation of IP data operations, switching and routing technologies, IPv4 and IPV6 addressing, troubleshooting, security etc.
The book is very critical as it provides a hands-on lab for practice purposes. In addition to that, the Sybex interactive online learning environment provides over 100 electronic flashcards to streamline your study time and expand your resources. In this book, you will get:
- 100% content for the 200-105 exam
- Get essential hands-on experience in IP network operations, troubleshooting, working with IPv4 and IPv6, routing and switching.
- Access sample questions and flashcards
- Test your knowledge with a bonus practice exam
If you need adequate CCNA ICND2 preparation then you should consider securing it from Amazon using the link below.
4. 101 Labs for the Cisco CCNA Exam
In a case where the theory part does not seem to suit you or rather you want to expand your knowledge in the practical part then the book above is a special guide for you.
The “101 Labs for the Cisco CCNA Exam: Exam – 100-105 and 200-125” will improve your expertise when solving practical network problems and also provide you with the necessary knowledge to successfully tackle CCENT and CCNA exam questions.
The topics covered here include:
- How to configure and troubleshoot VLANs and Trunking
- Configuring eBGP
- RIP, EIGRP, EIGRP for IPv6, OSPF and OSPFv3
- Router and switch security
- SNMP
- HSRP
- GRE etc
Here is the link to buy:
5. CCT/CCNA Routing and Switching All-in-One
This book authored by Glen E Clarke and Richard Deal aims to provide you with the required knowledge to take and pass the Cisco Certified Technician (CCT) and Cisco Certified Network Associate (CCNA) exams. With a pair of Cisco networking professionals and training experts, this guide fully covers all the required content for the 100-490 & 200-301 exams. It also provides examples and practice questions that reflect the live test in tone, content and format.
This book can also serve as day-to-day reference material for IT and network professionals. The content in the guide includes:
- Network fundamentals and the OSI model
- TCP/IP protocol suite
- Subnetting and VLSM
- Cisco device management
- Switching
- Static and dynamic routing
- IP services and IPv6
- Security fundamentals
- How to implement security on Cisco devices
Grab a copy using the link:
6. CCNA 200-301 Exam Cram
The 6th edition of the CCNA 200-301 Exam Cram is the latest and updated guide to study for the Cisco 200-301 CCNA exam. It offers the best coverage as well as practice questions for every exam topic. The book consists of detailed and innumerable tools such as overviews, CramSavers, exam alerts, CramQuizzes, end-of-chapter review questions, author notes and tips, Packet Tracer labs, and an extensive glossary.
By reading this book, you will:
- Get a detailed understanding of networking fundamentals, which include network topology architectures, network components, physical interfaces and cabling types, TCP and UDP, wireless principals, switching concepts, and virtualization fundamentals.
- Understand IPv4 addressing and subnetting as well as configuring IPv6
- Configuring VLANs, interswitch connectivity, and Layer 2 discovery protocols
- Get a description of Rapid PVST+ Spanning Tree Protocol
- Know DHCP, DNS, and other networking services like SNMP, Syslog, SSH, and TFTP/FTP
- Learn how to configure and validate inside source NAT and NTP
- Comparing Cisco Wireless Architectures and AP Modes
Get a copy of the book: