Configuration Properties

Below you can find a list of configuration properties.

Name Default Description

Name	Default	Description
eureka.client.allow-redirects	`false`	Indicates whether server can redirect a client request to a backup server/cluster. If set to false, the server will handle the request directly, If set to true, it may send HTTP redirect to the client, with a new server location.
eureka.client.availability-zones		Gets the list of availability zones (used in AWS data centers) for the region in which this instance resides. The changes are effective at runtime at the next registry fetch cycle as specified by registryFetchIntervalSeconds.
eureka.client.backup-registry-impl		Gets the name of the implementation which implements BackupRegistry to fetch the registry information as a fallback option for only the first time when the eureka client starts. This may be needed for applications which needs additional resiliency for registry information without which it cannot operate.
eureka.client.cache-refresh-executor-exponential-back-off-bound	`10`	Cache refresh executor exponential back off related property. It is a maximum multiplier value for retry delay, in case where a sequence of timeouts occurred.
eureka.client.cache-refresh-executor-thread-pool-size	`2`	The thread pool size for the cacheRefreshExecutor to initialise with.
eureka.client.client-data-accept		EurekaAccept name for client data accept.
eureka.client.decoder-name		This is a transient config and once the latest codecs are stable, can be removed (as there will only be one).
eureka.client.disable-delta	`false`	Indicates whether the eureka client should disable fetching of delta and should rather resort to getting the full registry information. Note that the delta fetches can reduce the traffic tremendously, because the rate of change with the eureka server is normally much lower than the rate of fetches. The changes are effective at runtime at the next registry fetch cycle as specified by registryFetchIntervalSeconds
eureka.client.dollar-replacement	`_-`	Get a replacement string for Dollar sign <code>$</code> during serializing/deserializing information in eureka server.
eureka.client.enabled	`true`	Flag to indicate that the Eureka client is enabled.
eureka.client.encoder-name		This is a transient config and once the latest codecs are stable, can be removed (as there will only be one).
eureka.client.escape-char-replacement	`__`	Get a replacement string for underscore sign <code>_</code> during serializing/ deserializing information in eureka server.
eureka.client.eureka-connection-idle-timeout-seconds	`30`	Indicates how much time (in seconds) that the HTTP connections to eureka server can stay idle before it can be closed. In the AWS environment, it is recommended that the values is 30 seconds or less, since the firewall cleans up the connection information after a few mins leaving the connection hanging in limbo.
eureka.client.eureka-server-connect-timeout-seconds	`5`	Indicates how long to wait (in seconds) before a connection to eureka server needs to timeout. Note that the connections in the client are pooled by {@link HttpClient} and this setting affects the actual connection creation and also the wait time to get the connection from the pool.
eureka.client.eureka-server-d-n-s-name		Gets the DNS name to be queried to get the list of eureka servers.This information is not required if the contract returns the service urls by implementing serviceUrls. The DNS mechanism is used when useDnsForFetchingServiceUrls is set to true and the eureka client expects the DNS to configured a certain way so that it can fetch changing eureka servers dynamically. The changes are effective at runtime.
eureka.client.eureka-server-port		Gets the port to be used to construct the service url to contact eureka server when the list of eureka servers come from the DNS.This information is not required if the contract returns the service urls eurekaServerServiceUrls(String). The DNS mechanism is used when useDnsForFetchingServiceUrls is set to true and the eureka client expects the DNS to configured a certain way so that it can fetch changing eureka servers dynamically. The changes are effective at runtime.
eureka.client.eureka-server-read-timeout-seconds	`8`	Indicates how long to wait (in seconds) before a read from eureka server needs to timeout.
eureka.client.eureka-server-total-connections	`200`	Gets the total number of connections that is allowed from eureka client to all eureka servers.
eureka.client.eureka-server-total-connections-per-host	`50`	Gets the total number of connections that is allowed from eureka client to a eureka server host.
eureka.client.eureka-server-u-r-l-context		Gets the URL context to be used to construct the service url to contact eureka server when the list of eureka servers come from the DNS. This information is not required if the contract returns the service urls from eurekaServerServiceUrls. The DNS mechanism is used when useDnsForFetchingServiceUrls is set to true and the eureka client expects the DNS to configured a certain way so that it can fetch changing eureka servers dynamically. The changes are effective at runtime.
eureka.client.eureka-service-url-poll-interval-seconds	`300`	Indicates how often(in seconds) to poll for changes to eureka server information. Eureka servers could be added or removed and this setting controls how soon the eureka clients should know about it.
eureka.client.fetch-registry	`true`	Indicates whether this client should fetch eureka registry information from eureka server.
eureka.client.fetch-remote-regions-registry		Comma separated list of regions for which the eureka registry information will be fetched. It is mandatory to define the availability zones for each of these regions as returned by availabilityZones. Failing to do so, will result in failure of discovery client startup.
eureka.client.filter-only-up-instances	`true`	Indicates whether to get the applications after filtering the applications for instances with only InstanceStatus UP states.
eureka.client.g-zip-content	`true`	Indicates whether the content fetched from eureka server has to be compressed whenever it is supported by the server. The registry information from the eureka server is compressed for optimum network traffic.
eureka.client.healthcheck.enabled	`true`	Enables the Eureka health check handler.
eureka.client.heartbeat-executor-exponential-back-off-bound	`10`	Heartbeat executor exponential back off related property. It is a maximum multiplier value for retry delay, in case where a sequence of timeouts occurred.
eureka.client.heartbeat-executor-thread-pool-size	`2`	The thread pool size for the heartbeatExecutor to initialise with.
eureka.client.initial-instance-info-replication-interval-seconds	`40`	Indicates how long initially (in seconds) to replicate instance info to the eureka server.
eureka.client.instance-info-replication-interval-seconds	`30`	Indicates how often(in seconds) to replicate instance changes to be replicated to the eureka server.
eureka.client.jersey.enabled	`true`	Enables the use of JerseyClient for Eureka HTTP Client.
eureka.client.log-delta-diff	`false`	Indicates whether to log differences between the eureka server and the eureka client in terms of registry information. Eureka client tries to retrieve only delta changes from eureka server to minimize network traffic. After receiving the deltas, eureka client reconciles the information from the server to verify it has not missed out some information. Reconciliation failures could happen when the client has had network issues communicating to server.If the reconciliation fails, eureka client gets the full registry information. While getting the full registry information, the eureka client can log the differences between the client and the server and this setting controls that. The changes are effective at runtime at the next registry fetch cycle as specified by registryFetchIntervalSecondsr
eureka.client.on-demand-update-status-change	`true`	If set to true, local status updates via ApplicationInfoManager will trigger on-demand (but rate limited) register/updates to remote eureka servers.
eureka.client.order	`0`	Order of the discovery client used by `CompositeDiscoveryClient` for sorting available clients.
eureka.client.prefer-same-zone-eureka	`true`	Indicates whether or not this instance should try to use the eureka server in the same zone for latency and/or other reason. Ideally eureka clients are configured to talk to servers in the same zone The changes are effective at runtime at the next registry fetch cycle as specified by registryFetchIntervalSeconds
eureka.client.property-resolver
eureka.client.proxy-host		Gets the proxy host to eureka server if any.
eureka.client.proxy-password		Gets the proxy password if any.
eureka.client.proxy-port		Gets the proxy port to eureka server if any.
eureka.client.proxy-user-name		Gets the proxy user name if any.
eureka.client.refresh.enable	`true`	Determines whether the EurekaClient instance can be refreshed or not(If disabled none of the Eureka client properties will be refreshable).
eureka.client.region	`us-east-1`	Gets the region (used in AWS datacenters) where this instance resides.
eureka.client.register-with-eureka	`true`	Indicates whether or not this instance should register its information with eureka server for discovery by others. In some cases, you do not want your instances to be discovered whereas you just want do discover other instances.
eureka.client.registry-fetch-interval-seconds	`30`	Indicates how often(in seconds) to fetch the registry information from the eureka server.
eureka.client.registry-refresh-single-vip-address		Indicates whether the client is only interested in the registry information for a single VIP.
eureka.client.service-url		Map of availability zone to list of fully qualified URLs to communicate with eureka server. Each value can be a single URL or a comma separated list of alternative locations. Typically the eureka server URLs carry protocol,host,port,context and version information if any. Example: ec2-256-156-243-129.compute-1.amazonaws.com:7001/eureka/ The changes are effective at runtime at the next service url refresh cycle as specified by eurekaServiceUrlPollIntervalSeconds.
eureka.client.should-enforce-registration-at-init	`false`	Indicates whether the client should enforce registration during initialization. Defaults to false.
eureka.client.should-unregister-on-shutdown	`true`	Indicates whether the client should explicitly unregister itself from the remote server on client shutdown.
eureka.client.timeout.connect-request-timeout	`180000`
eureka.client.timeout.connect-timeout	`180000`	Default values are set to 180000, in keeping with {@link RequestConfig} and {@link SocketConfig} defaults.
eureka.client.timeout.socket-timeout	`180000`
eureka.client.tls.enabled
eureka.client.tls.key-password
eureka.client.tls.key-store
eureka.client.tls.key-store-password
eureka.client.tls.key-store-type
eureka.client.tls.trust-store
eureka.client.tls.trust-store-password
eureka.client.tls.trust-store-type
eureka.client.use-dns-for-fetching-service-urls	`false`	Indicates whether the eureka client should use the DNS mechanism to fetch a list of eureka servers to talk to. When the DNS name is updated to have additional servers, that information is used immediately after the eureka client polls for that information as specified in eurekaServiceUrlPollIntervalSeconds. Alternatively, the service urls can be returned serviceUrls, but the users should implement their own mechanism to return the updated list in case of changes. The changes are effective at runtime.
eureka.client.webclient.enabled	`false`	Enables the use of WebClient for Eureka HTTP Client.
eureka.dashboard.enabled	`true`	Flag to enable the Eureka dashboard. Default true.
eureka.dashboard.path	`/`	The path to the Eureka dashboard (relative to the servlet path). Defaults to "/".
eureka.datacenter	`default`	Eureka datacenter. Defaults to "default".
eureka.environment	`test`	Eureka environment. Defaults to "test".
eureka.instance.a-s-g-name		Gets the AWS autoscaling group name associated with this instance. This information is specifically used in an AWS environment to automatically put an instance out of service after the instance is launched and it has been disabled for traffic..
eureka.instance.app-group-name		Get the name of the application group to be registered with eureka.
eureka.instance.appname	`unknown`	Get the name of the application to be registered with eureka.
eureka.instance.async-client-initialization	`false`	If true the EurekaClient will be initialized asynchronously when the InstanceRegistry bean is created.
eureka.instance.data-center-info		Returns the data center this instance is deployed. This information is used to get some AWS specific instance information if the instance is deployed in AWS.
eureka.instance.default-address-resolution-order	`[]`
eureka.instance.environment
eureka.instance.health-check-url		Gets the absolute health check page URL for this instance. The users can provide the healthCheckUrlPath if the health check page resides in the same instance talking to eureka, else in the cases where the instance is a proxy for some other server, users can provide the full URL. If the full URL is provided it takes precedence. <p> It is normally used for making educated decisions based on the health of the instance - for example, it can be used to determine whether to proceed deployments to an entire farm or stop the deployments without causing further damage. The full URL should follow the format ${eureka.hostname}:7001/ where the value ${eureka.hostname} is replaced at runtime.
eureka.instance.health-check-url-path		Gets the relative health check URL path for this instance. The health check page URL is then constructed out of the hostname and the type of communication - secure or insecure as specified in securePort and nonSecurePort. It is normally used for making educated decisions based on the health of the instance - for example, it can be used to determine whether to proceed deployments to an entire farm or stop the deployments without causing further damage.
eureka.instance.home-page-url		Gets the absolute home page URL for this instance. The users can provide the homePageUrlPath if the home page resides in the same instance talking to eureka, else in the cases where the instance is a proxy for some other server, users can provide the full URL. If the full URL is provided it takes precedence. It is normally used for informational purposes for other services to use it as a landing page. The full URL should follow the format ${eureka.hostname}:7001/ where the value ${eureka.hostname} is replaced at runtime.
eureka.instance.home-page-url-path	`/`	Gets the relative home page URL Path for this instance. The home page URL is then constructed out of the hostName and the type of communication - secure or insecure. It is normally used for informational purposes for other services to use it as a landing page.
eureka.instance.hostname		The hostname if it can be determined at configuration time (otherwise it will be guessed from OS primitives).
eureka.instance.initial-status	`up`	Initial status to register with remote Eureka server.
eureka.instance.instance-enabled-onit	`false`	Indicates whether the instance should be enabled for taking traffic as soon as it is registered with eureka. Sometimes the application might need to do some pre-processing before it is ready to take traffic.
eureka.instance.instance-id		Get the unique Id (within the scope of the appName) of this instance to be registered with eureka.
eureka.instance.ip-address		Get the IPAdress of the instance. This information is for academic purposes only as the communication from other instances primarily happen using the information supplied in {@link #getHostName(boolean)}.
eureka.instance.lease-expiration-duration-in-seconds	`90`	Indicates the time in seconds that the eureka server waits since it received the last heartbeat before it can remove this instance from its view and there by disallowing traffic to this instance. Setting this value too long could mean that the traffic could be routed to the instance even though the instance is not alive. Setting this value too small could mean, the instance may be taken out of traffic because of temporary network glitches.This value to be set to at least higher than the value specified in leaseRenewalIntervalInSeconds.
eureka.instance.lease-renewal-interval-in-seconds	`30`	Indicates how often (in seconds) the eureka client needs to send heartbeats to eureka server to indicate that it is still alive. If the heartbeats are not received for the period specified in leaseExpirationDurationInSeconds, eureka server will remove the instance from its view, there by disallowing traffic to this instance. Note that the instance could still not take traffic if it implements HealthCheckCallback and then decides to make itself unavailable.
eureka.instance.metadata-map		Gets the metadata name/value pairs associated with this instance. This information is sent to eureka server and can be used by other instances.
eureka.instance.metadata-map.weight	`1`	The weight of service instance for weighted load balancing.
eureka.instance.namespace	`eureka`	Get the namespace used to find properties. Ignored in Spring Cloud.
eureka.instance.non-secure-port	`80`	Get the non-secure port on which the instance should receive traffic.
eureka.instance.non-secure-port-enabled	`true`	Indicates whether the non-secure port should be enabled for traffic or not.
eureka.instance.prefer-ip-address	`false`	Flag to say that, when guessing a hostname, the IP address of the server should be used in preference to the hostname reported by the OS.
eureka.instance.registry.default-open-for-traffic-count	`1`	Value used in determining when leases are cancelled, default to 1 for standalone. Should be set to 0 for peer replicated eurekas

eureka.client.allow-redirects

false

Indicates whether server can redirect a client request to a backup server/cluster. If set to false, the server will handle the request directly, If set to true, it may send HTTP redirect to the client, with a new server location.

eureka.client.availability-zones

Gets the list of availability zones (used in AWS data centers) for the region in which this instance resides. The changes are effective at runtime at the next registry fetch cycle as specified by registryFetchIntervalSeconds.

eureka.client.backup-registry-impl

Gets the name of the implementation which implements BackupRegistry to fetch the registry information as a fallback option for only the first time when the eureka client starts. This may be needed for applications which needs additional resiliency for registry information without which it cannot operate.

eureka.client.cache-refresh-executor-exponential-back-off-bound

10

Cache refresh executor exponential back off related property. It is a maximum multiplier value for retry delay, in case where a sequence of timeouts occurred.

eureka.client.cache-refresh-executor-thread-pool-size

2

The thread pool size for the cacheRefreshExecutor to initialise with.

eureka.client.client-data-accept

EurekaAccept name for client data accept.

eureka.client.decoder-name

This is a transient config and once the latest codecs are stable, can be removed (as there will only be one).

eureka.client.disable-delta

false

Indicates whether the eureka client should disable fetching of delta and should rather resort to getting the full registry information. Note that the delta fetches can reduce the traffic tremendously, because the rate of change with the eureka server is normally much lower than the rate of fetches. The changes are effective at runtime at the next registry fetch cycle as specified by registryFetchIntervalSeconds

eureka.client.dollar-replacement

_-

Get a replacement string for Dollar sign <code>$</code> during serializing/deserializing information in eureka server.

eureka.client.enabled

true

Flag to indicate that the Eureka client is enabled.

eureka.client.encoder-name

This is a transient config and once the latest codecs are stable, can be removed (as there will only be one).

eureka.client.escape-char-replacement

__

Get a replacement string for underscore sign <code>_</code> during serializing/ deserializing information in eureka server.

eureka.client.eureka-connection-idle-timeout-seconds

30

Indicates how much time (in seconds) that the HTTP connections to eureka server can stay idle before it can be closed. In the AWS environment, it is recommended that the values is 30 seconds or less, since the firewall cleans up the connection information after a few mins leaving the connection hanging in limbo.

eureka.client.eureka-server-connect-timeout-seconds

5

Indicates how long to wait (in seconds) before a connection to eureka server needs to timeout. Note that the connections in the client are pooled by {@link HttpClient} and this setting affects the actual connection creation and also the wait time to get the connection from the pool.

eureka.client.eureka-server-d-n-s-name

Gets the DNS name to be queried to get the list of eureka servers.This information is not required if the contract returns the service urls by implementing serviceUrls. The DNS mechanism is used when useDnsForFetchingServiceUrls is set to true and the eureka client expects the DNS to configured a certain way so that it can fetch changing eureka servers dynamically. The changes are effective at runtime.

eureka.client.eureka-server-port

Gets the port to be used to construct the service url to contact eureka server when the list of eureka servers come from the DNS.This information is not required if the contract returns the service urls eurekaServerServiceUrls(String). The DNS mechanism is used when useDnsForFetchingServiceUrls is set to true and the eureka client expects the DNS to configured a certain way so that it can fetch changing eureka servers dynamically. The changes are effective at runtime.

eureka.client.eureka-server-read-timeout-seconds

8

Indicates how long to wait (in seconds) before a read from eureka server needs to timeout.

eureka.client.eureka-server-total-connections

200

Gets the total number of connections that is allowed from eureka client to all eureka servers.

eureka.client.eureka-server-total-connections-per-host

50

Gets the total number of connections that is allowed from eureka client to a eureka server host.

eureka.client.eureka-server-u-r-l-context

Gets the URL context to be used to construct the service url to contact eureka server when the list of eureka servers come from the DNS. This information is not required if the contract returns the service urls from eurekaServerServiceUrls. The DNS mechanism is used when useDnsForFetchingServiceUrls is set to true and the eureka client expects the DNS to configured a certain way so that it can fetch changing eureka servers dynamically. The changes are effective at runtime.

eureka.client.eureka-service-url-poll-interval-seconds

300

Indicates how often(in seconds) to poll for changes to eureka server information. Eureka servers could be added or removed and this setting controls how soon the eureka clients should know about it.

eureka.client.fetch-registry

true

Indicates whether this client should fetch eureka registry information from eureka server.

eureka.client.fetch-remote-regions-registry

Comma separated list of regions for which the eureka registry information will be fetched. It is mandatory to define the availability zones for each of these regions as returned by availabilityZones. Failing to do so, will result in failure of discovery client startup.

eureka.client.filter-only-up-instances

true

Indicates whether to get the applications after filtering the applications for instances with only InstanceStatus UP states.

eureka.client.g-zip-content

true

Indicates whether the content fetched from eureka server has to be compressed whenever it is supported by the server. The registry information from the eureka server is compressed for optimum network traffic.

eureka.client.healthcheck.enabled

true

Enables the Eureka health check handler.

eureka.client.heartbeat-executor-exponential-back-off-bound

10

Heartbeat executor exponential back off related property. It is a maximum multiplier value for retry delay, in case where a sequence of timeouts occurred.

eureka.client.heartbeat-executor-thread-pool-size

2

The thread pool size for the heartbeatExecutor to initialise with.

eureka.client.initial-instance-info-replication-interval-seconds

40

Indicates how long initially (in seconds) to replicate instance info to the eureka server.

eureka.client.instance-info-replication-interval-seconds

30

Indicates how often(in seconds) to replicate instance changes to be replicated to the eureka server.

eureka.client.jersey.enabled

true

Enables the use of JerseyClient for Eureka HTTP Client.

eureka.client.log-delta-diff

false

Indicates whether to log differences between the eureka server and the eureka client in terms of registry information. Eureka client tries to retrieve only delta changes from eureka server to minimize network traffic. After receiving the deltas, eureka client reconciles the information from the server to verify it has not missed out some information. Reconciliation failures could happen when the client has had network issues communicating to server.If the reconciliation fails, eureka client gets the full registry information. While getting the full registry information, the eureka client can log the differences between the client and the server and this setting controls that. The changes are effective at runtime at the next registry fetch cycle as specified by registryFetchIntervalSecondsr

eureka.client.on-demand-update-status-change

true

If set to true, local status updates via ApplicationInfoManager will trigger on-demand (but rate limited) register/updates to remote eureka servers.

eureka.client.order

0

Order of the discovery client used by CompositeDiscoveryClient for sorting available clients.

eureka.client.prefer-same-zone-eureka

true

Indicates whether or not this instance should try to use the eureka server in the same zone for latency and/or other reason. Ideally eureka clients are configured to talk to servers in the same zone The changes are effective at runtime at the next registry fetch cycle as specified by registryFetchIntervalSeconds

eureka.client.property-resolver

eureka.client.proxy-host

Gets the proxy host to eureka server if any.

eureka.client.proxy-password

Gets the proxy password if any.

eureka.client.proxy-port

Gets the proxy port to eureka server if any.

eureka.client.proxy-user-name

Gets the proxy user name if any.

eureka.client.refresh.enable

true

Determines whether the EurekaClient instance can be refreshed or not(If disabled none of the Eureka client properties will be refreshable).

eureka.client.region

us-east-1

Gets the region (used in AWS datacenters) where this instance resides.

eureka.client.register-with-eureka

true

Indicates whether or not this instance should register its information with eureka server for discovery by others. In some cases, you do not want your instances to be discovered whereas you just want do discover other instances.

eureka.client.registry-fetch-interval-seconds

30

Indicates how often(in seconds) to fetch the registry information from the eureka server.

eureka.client.registry-refresh-single-vip-address

Indicates whether the client is only interested in the registry information for a single VIP.

eureka.client.service-url

Map of availability zone to list of fully qualified URLs to communicate with eureka server. Each value can be a single URL or a comma separated list of alternative locations. Typically the eureka server URLs carry protocol,host,port,context and version information if any. Example: ec2-256-156-243-129.compute-1.amazonaws.com:7001/eureka/ The changes are effective at runtime at the next service url refresh cycle as specified by eurekaServiceUrlPollIntervalSeconds.

eureka.client.should-enforce-registration-at-init

false

Indicates whether the client should enforce registration during initialization. Defaults to false.

eureka.client.should-unregister-on-shutdown

true

Indicates whether the client should explicitly unregister itself from the remote server on client shutdown.

eureka.client.timeout.connect-request-timeout

180000

eureka.client.timeout.connect-timeout

180000

Default values are set to 180000, in keeping with {@link RequestConfig} and {@link SocketConfig} defaults.

eureka.client.timeout.socket-timeout

180000

eureka.client.tls.enabled

eureka.client.tls.key-password

eureka.client.tls.key-store

eureka.client.tls.key-store-password

eureka.client.tls.key-store-type

eureka.client.tls.trust-store

eureka.client.tls.trust-store-password

eureka.client.tls.trust-store-type

eureka.client.use-dns-for-fetching-service-urls

false

Indicates whether the eureka client should use the DNS mechanism to fetch a list of eureka servers to talk to. When the DNS name is updated to have additional servers, that information is used immediately after the eureka client polls for that information as specified in eurekaServiceUrlPollIntervalSeconds. Alternatively, the service urls can be returned serviceUrls, but the users should implement their own mechanism to return the updated list in case of changes. The changes are effective at runtime.

eureka.client.webclient.enabled

false

Enables the use of WebClient for Eureka HTTP Client.

eureka.dashboard.enabled

true

Flag to enable the Eureka dashboard. Default true.

eureka.dashboard.path

/

The path to the Eureka dashboard (relative to the servlet path). Defaults to "/".

eureka.datacenter

default

Eureka datacenter. Defaults to "default".

eureka.environment

test

Eureka environment. Defaults to "test".

eureka.instance.a-s-g-name

Gets the AWS autoscaling group name associated with this instance. This information is specifically used in an AWS environment to automatically put an instance out of service after the instance is launched and it has been disabled for traffic..

eureka.instance.app-group-name

Get the name of the application group to be registered with eureka.

eureka.instance.appname

unknown

Get the name of the application to be registered with eureka.

eureka.instance.async-client-initialization

false

If true the EurekaClient will be initialized asynchronously when the InstanceRegistry bean is created.

eureka.instance.data-center-info

Returns the data center this instance is deployed. This information is used to get some AWS specific instance information if the instance is deployed in AWS.

eureka.instance.default-address-resolution-order

[]

eureka.instance.environment

eureka.instance.health-check-url

Gets the absolute health check page URL for this instance. The users can provide the healthCheckUrlPath if the health check page resides in the same instance talking to eureka, else in the cases where the instance is a proxy for some other server, users can provide the full URL. If the full URL is provided it takes precedence. <p> It is normally used for making educated decisions based on the health of the instance - for example, it can be used to determine whether to proceed deployments to an entire farm or stop the deployments without causing further damage. The full URL should follow the format ${eureka.hostname}:7001/ where the value ${eureka.hostname} is replaced at runtime.

eureka.instance.health-check-url-path

Gets the relative health check URL path for this instance. The health check page URL is then constructed out of the hostname and the type of communication - secure or insecure as specified in securePort and nonSecurePort. It is normally used for making educated decisions based on the health of the instance - for example, it can be used to determine whether to proceed deployments to an entire farm or stop the deployments without causing further damage.

eureka.instance.home-page-url

Gets the absolute home page URL for this instance. The users can provide the homePageUrlPath if the home page resides in the same instance talking to eureka, else in the cases where the instance is a proxy for some other server, users can provide the full URL. If the full URL is provided it takes precedence. It is normally used for informational purposes for other services to use it as a landing page. The full URL should follow the format ${eureka.hostname}:7001/ where the value ${eureka.hostname} is replaced at runtime.

eureka.instance.home-page-url-path

/

Gets the relative home page URL Path for this instance. The home page URL is then constructed out of the hostName and the type of communication - secure or insecure. It is normally used for informational purposes for other services to use it as a landing page.

eureka.instance.hostname

The hostname if it can be determined at configuration time (otherwise it will be guessed from OS primitives).

eureka.instance.initial-status

up

Initial status to register with remote Eureka server.

eureka.instance.instance-enabled-onit

false

Indicates whether the instance should be enabled for taking traffic as soon as it is registered with eureka. Sometimes the application might need to do some pre-processing before it is ready to take traffic.

eureka.instance.instance-id

Get the unique Id (within the scope of the appName) of this instance to be registered with eureka.

eureka.instance.ip-address

Get the IPAdress of the instance. This information is for academic purposes only as the communication from other instances primarily happen using the information supplied in {@link #getHostName(boolean)}.

eureka.instance.lease-expiration-duration-in-seconds

90

Indicates the time in seconds that the eureka server waits since it received the last heartbeat before it can remove this instance from its view and there by disallowing traffic to this instance. Setting this value too long could mean that the traffic could be routed to the instance even though the instance is not alive. Setting this value too small could mean, the instance may be taken out of traffic because of temporary network glitches.This value to be set to at least higher than the value specified in leaseRenewalIntervalInSeconds.

eureka.instance.lease-renewal-interval-in-seconds

30

Indicates how often (in seconds) the eureka client needs to send heartbeats to eureka server to indicate that it is still alive. If the heartbeats are not received for the period specified in leaseExpirationDurationInSeconds, eureka server will remove the instance from its view, there by disallowing traffic to this instance. Note that the instance could still not take traffic if it implements HealthCheckCallback and then decides to make itself unavailable.

eureka.instance.metadata-map

Gets the metadata name/value pairs associated with this instance. This information is sent to eureka server and can be used by other instances.

eureka.instance.metadata-map.weight

1

The weight of service instance for weighted load balancing.

eureka.instance.namespace

eureka

Get the namespace used to find properties. Ignored in Spring Cloud.

eureka.instance.non-secure-port

80

Get the non-secure port on which the instance should receive traffic.

eureka.instance.non-secure-port-enabled

true

Indicates whether the non-secure port should be enabled for traffic or not.

eureka.instance.prefer-ip-address

false

Flag to say that, when guessing a hostname, the IP address of the server should be used in preference to the hostname reported by the OS.

eureka.instance.registry.default-open-for-traffic-count

1

Value used in determining when leases are cancelled, default to 1 for standalone. Should be set to 0 for peer replicated eurekas