Skip to content

LoadSync™

LoadSync™ is the building management software for your loadcenter. For hardware setup and UPS connections, see the Loadcenter Guide.

LoadSync™ can be accessed remotely with the remote access web UI. Please contact us for the login.

The LoadSync™ interface uses a sidebar on the right side of the screen for navigating between pages. The available pages depend on your loadcenter's hardware configuration.

Variable pages

LoadSync™ automatically selects which pages to display based on what type of unit you have.

By default, the following pages will display:

  • Overview
  • Miners
  • Graphs
  • Alarms
  • System

Depending on what devices are communicating with LoadSync™, the follow pages may also appear:

  • Climate
  • Power
  • Engine
  • Market Sync

Missing pages/devices

If LoadSync™ is having trouble communicating with a device, it may be missing some pages. Sometimes this can be rectified by running rediscovery, located on the System page under Advanced.

Overview

The overbiew page provides a quick overview of your loadcenter's status:

  • Summary


    • Fan status
    • Fan speed
    • Building temperature
    • Louver state
    • 3-phase amperage
    • Voltage

    Hash Generator only

    • RPM
    • Temperature
    • Oil Pressure
    • Gas Pressure
    • Battery Voltage

    Overview page

    Summary tab

Miners

The miners page displays a fleet overview of all discovered miners in a table with the following columns:

  • IP Address
  • Hashrate
  • Temperature
  • Wattage
  • Efficiency

Miners fleet view

Miners page

Scanning for Miners

To discover miners on the network, click the Re-Scan Miners button at the top of the page. LoadSync™ will scan the local network and populate the table with any miners it finds.

Note

LoadSync™ automatically searches for miners on startup, so this may not even be required unless there are miners missing from the list.

Individual Miner Controls

Miner Details

Clicking on a miner's IP address in the fleet table opens a detailed view with the tabs described below.

Displays real-time miner metrics:

  • Hashrate


    Current mining speed

  • Board Temperatures


    Temperature readings per hashboard

  • Wattage


    Current power consumption

  • Efficiency


    Watts per terahash (W/TH)

  • Uptime


    Time since last restart

Miner detail - Basic tab

Miner basic tab

Provides controls for the miner:

  • Power Limit


    Adjust the wattage limit

  • Enable/Disable Mining


    Toggle mining on or off

  • Fault Light


    Toggle the miner's fault indicator LED

  • Reboot


    Restart the miner

Miner detail - Settings tab

Miner settings tab

Shows additional diagnostic data for the miner.

Climate

The climate page monitors and controls the loadcenter's ventilation system. It is organized into tabs:

Displays current climate readings:

  • Fan Status


    Whether the fan system is running

  • Fan Speed


    Current speed as a percentage (0–100%)

  • Building Temperature


    Current internal temperature

  • Building Humidity


    Current internal humidity

  • Louver State


    Whether the building louvers are open or closed

Climate - Basic tab

Climate basic tab

Provides controls for the fan system:

  • Fan Enabled


    Turn the fan system on or off

  • Fan Auto


    Toggle automatic temperature-based fan control

  • Min. Speed


    Set the minimum fan speed (0–100%)

  • Target Temp.


    Set the target temperature for auto mode

Auto Mode Behavior

When auto mode is enabled, the fans will automatically adjust speed to maintain the target temperature. When disabled, fans run at the minimum speed setting.

Climate - Settings tab

Climate settings tab

Power

The power page monitors the loadcenter's power distribution units (PDUs) and electrical output.

Displays per-phase power data:

  • Amperage


    Current draw per phase

  • Voltage


    Voltage per phase

  • Kilowatts


    Power output per phase

Power - Basic tab

Power basic tab

Lists all connected PDUs with their status.

PDU Details

Clicking on an individual PDU shows detailed port-level information including per-phase amperage, voltage, and kilowatt readings.

Power - PDU list

PDU list

Individual PDU detail

PDU details

Engine

Info

The engine page is only available on loadcenters equipped with an engine/generator.

The engine page monitors and controls the loadcenter's generator. It is organized into tabs:

Displays real-time engine metrics:

  • RPM