Open Source System Software

The Hewlett-Packard Linux Imaging and Printing Project provides a unified single and multi-function connectivity solution for Linux. For support and help, please visit https://launchpad.net/hplip

A very high quality package of printer drivers for CUPS on Linux and other POSIX-compliant operating systems. This project also maintains an enhanced Print plug-in for GIMP 2.x from the same code base.

JasperStarter is a command line launcher and batch compiler for JasperReports.

vDos is specific to run serious (mainly text mode) DOS applications in Windows 32 or 64-bit, Windows 7 or later. You need at least already use such a DOS application to appreciate vDos. If you don’t, want to play with DOS (or its games): vDos isn’t meant for you! Recent versions (latest 2026.05.01) and the vDos forum are now hosted at: https://www.vdos.info

This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in the data directory but UI has its own repository ESP3D-WEBUI. Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. Complete configuration by web browser (Station or Access point) or by Serial/telnet commands.

CUPS back-end for the canon printers using the proprietary USB over IP BJNP protocol. This back-end allows Cups to print over the network to a Canon printer. The design is based on reverse engineering of the protocol. Version 2.0 adds ink-level reporting and improved out-of-paper detection. Version 2.0.1 is now released under GPLv2 or later to be compatible with the changed cups license. No other changes. Version 2.0.2 fixes a compile error with GCC9 Version 2.0.3 Fix GCC10 compile errors. increase status buffer size for newer printers that send larger status messages

CID (Closed In Directory) is a set of bash scripts for inserting and managing Linux computers in Active Directory domains. Modifications made to the system allow Linux to behave like a Windows computer within AD.

Those who have read past the "Malware" warning can be assured there is absolutely no malware in this OS or in the download. This warning comes from the "netcat" binary included in the download as a DOS time client. Unfortunately netcat has code that is flagged as malware. FREESCO, a NAT/firewall router/server based on Linux and runs on a single 1.44MB floppy. Freesco is very powerful and versatile and can connect multiple home or small office networks to most types of Internet connections including dialup.

The Hewlett-Packard Co. Linux Inkjet Driver Project has moved!

A collection of enhanced PPD files for Canon Pixma MP600 and MP610 all-in-one printers, and a Sane scanner driver for Canon Pixma MP140, MP210, MP520, MP610, MP710, MX700 for up to 4800 dpi resolution, that can be used with Sane 1.0.18 or 1.0.19.

Libinklevel is a library to check the ink level of ink jet printers connected via USB. Canon BJNP network printers are supported too. It works on Linux and FreeBSD.

Ink is a command line tool which displays the ink level of your printer. It makes use of libinklevel.

EmfPrinter is a virtual printer driver for Microsoft Windows which allows you to print documents as EMF/WMF vector images or to more than 100 raster formats (JPEG,PNG,BMP,etc). Document conversion has never been easier!

This project includes 4 main modules to use with CUPS : "KUPS", a KDE administration front-end, "XPP", a light graphical printing frontend, "QTCUPS", a front-end and library for Qt, and "CUPS-DRIVERS", GS drivers which allow to print to any printer.

A full-featured, GTK-based control panel for IceWM, featuring an IceWM theme designer, IceSoundManager (sound events), IcePref2, & tools to manage wallpaper, cursors, keys, window options, & more. IceWMCP has a familiar, Control Panel-like interface.

Allows stdin or files specified on the command line to be printed from a remote terminal using ANSI escape sequences. Inspired by the ansiprt.c component of U Wash's PINE.

This Operating System is specially for Raspberry Web Server Administration. Note : After Login, don't forget to put this command for usefull your fulldisk sudo parted (parted) print (parted) resizepart Partition number? 2 End? 100% (parted) quit sudo resize2fs after finish For editing Swap Memory size : sudo nano /etc/dphys-swapfile change : CONF_SWAPSIZE=100 to : CONF_SWAPSIZE=1000 (for 1Gb swap memory) ctrl + x (for save) sudo reboot For make speed server Boot : wget zram.sh https://sourceforge.net/projects/raspbian-9-webserver/files/zram.sh sudo chmod +x zram.sh sudo ./zram.sh sudo sed -i 's#^exit 0$#sudo /home/pi/zram.sh#' /etc/rc.local; echo exit 0 | sudo tee -a /etc/rc.local Rasbian SSH: Username : pi Password : raspberry Webmin (Administrator Web Server): (https://localhost:10000) Username : pi Password : raspberry Phpmyadmin : (http://localhost/phpmyadmin) Username : root Password : raspberry

Pythońol is an all-in-one program to help English speakers learn Spanish. Features include: Pronunciation, verb conjugation, dictionary (70,000+ words), thesaurus, quizzes, full-text translation, idioms, a verb browser, and a large reference section.

GUI wrapper for escputil (command line utility to manage Epson printers): it allows to watch ink levels, clean print heads, print nozzle patterns, align printer heads, .... with a simple and friendly user interface.

Print spooler and associated software.

The mpdist distribution consists of three programs: mp - pretty prints files to a PostScript printer. mptool - a graphical frontend to mp. mimep - allows users to print multimedia messages composed with any UA respecting the MIME standar

A set of tools for making the adminstration and support of large number of printers dramatically easier.

This tool enables you to produce a LaTeX (standard, no extension required) report for database objects (tables, views, indexes, functions, primary/foreign keys, columns, types, keywords, system functions) thanks to the JDBC Api.

A software to sort, list & print files from folder(s) & sub folders. Please note that you need Java Runtime Environment (JRE) 6 or later. Latest JRE is available at http://java.sun.com/javase/downloads/index.jsp Read "Latest News" below for details

Fourfive is a powerful yet extremely easy-to-configure web reporting solution for Oracle and possibly other RDBMS.